Design and manufacture of dies for strip bending

The purpose of this project is the design, development and validation of two dies intended exclusively for bending operations of different types of metal strips.

Zulaibar LH has created a prototype using SLM additive manufacturing technology for a complex-geometry part intended for an engine exhaust gas measurement machine designed by Centralauto S.L., in order to compare the cost and feasibility of this part with one manufactured using welding.

Improvement of the production process of spring-welded parts through the introduction of a collaborative robot that uses a specific gripper-shaped tool

Due to the starting format of the extruded raw material and the geometry of a repetitive part throughout the year to which 17 M10 threads are made per part by means of a manual threading machine, the company BRONYMEC aims to optimize the process by integrating a collaborative robot.

The association ‘Cofradía Nuestra Señora la Virgen Blanca’ asked us to design, develop and manufacture a tool to facilitate the placement of their lanterns for processions. Taking into account the needs and types of elements to be fastened, we developed a tool that facilitates the coupling and ensures optimum fastening of their materials.

Although SAMYLABS is a start-up company, they see improvements in machines that have already been developed and industrialised. With their current know-how, they cannot make new designs to take these improvements forward. Our participation in this project has been to share knowledge with the company to respond to the needs they have had.

Bisky Team had difficulties in machining certain carbon fibre parts to build the ‘ATLAS’ rocket and asked us if they could be machined at our centre. Due to the material, dimensions and shape of the parts, we saw many difficulties to carry out the project, but we decided to go ahead.

Perilan World manufactures a wide variety of parts that are machined on both lathes and milling machines. However, in this case, EDM wire was required to manufacture these parts and they do not have this technology.

INDUSTRIAS AUXILIARES, S.A.U. is a company dedicated to the manufacture of different furniture fittings. The company wants to carry out the machining of some complex pieces, both for their geometry and their hardness, as they cannot do it with the means they have.

In order to check whether the dimensions of a part produced by the company Hezilan are correct, we were asked to create a control tool. To do this, we first had to check the part to be checked, then design the checking tool and finally produce the product.

Additive manufacturing techniques have been used in some of our own designs, mainly in agendas, to improve their sustainability and environmental impact.

GRAFICAS ILBA manufactures cardboard packages. They have problems unloading the pallets carrying cardboard and a solution has been proposed.